MLY-1100 Automatic Stacking Machine

Features

Conveying part

• The conveying adopts aluminum profiles as conveying brackets
• The conveyor belt is 50mm wide and the type of grass pasted belt is 10A synchronous belt
• The synchro wheel can be adjusted with tension
• The width of the conveyor frame can be adjusted, and the linear circular rail is used as the guide

Flip part

• The flip plate is made of 20mm thick A3 steel plate
• Adopt 8 flip forks
• The transmission spindle adopts Φ40mm round steel
• A tension sleeve must be used to connect the turntable and the main shaft
• Both ends are supported by a UCP207 bearing

Stacking part

• The stacking table adopts servo cylinder to lift, Laminated countertops are fitted with plywood
• One end of the conveyor frame is fixed, and the other end is adjusted by the linear guide
• With another device that can continuously connect the board, stack the board and expand the board
• The expansion joint device is equipped with baffles on both sides, which can be adjusted left and right
• Adopt 2 groups of conveying pusher racks